Injection molds are consumables, and different types of injection molds have different life cycles. Basically, when the service life reaches its limit, it is time to replace the mold. Otherwise, the wear and aging of the injection mold will affect the quality of the product. Therefore, it is necessary to protect Changzhou injection molds in a reasonable and standardized manner. Despite the high cost of protection, it can make the quality of injection products produced more reliable. So how much impact does injection molding have on product quality? The following is a brief overview of injection mold processing:
Unreasonable locking force, excessive setting of locking force will exceed the load of the mold, leading to mold swelling and flying edges of injection products; The opening and closing speed of the mold is unreasonable, and excessive impact force during mold closing can damage the injection mold. Incorrect parameters of the ejector pin result in uneven force on the ejector pin or instantaneous impact force cracking and loss of product deformation; Correct low-pressure protection settings to prevent mold loss under pressure; Do a good job in mold cleaning to avoid damaging the surface and joints; Do a good job of lubrication, rust prevention, and basic maintenance to ensure that the mold is in normal working condition
From the above six points, it can be seen that regularly protecting injection molds is an important measure to ensure product quality, and at the same time, it can extend the service life of injection molds to the maximum extent, that is, extend the investment payback period. Imagine if your injection mold is scrapped before its normal lifespan, then you must open the injection mold from scratch, indicating that it is not cost-effective
Product Cagegory
